Laboratory Accessories Manufacturer in India
Being a trusted Laboratory Accessories Manufacturer in India, we do not compromise on the quality. Our laboratory glassware range includes Anemometer cup type, Dry bath incubator, test tube stand, and many more. These products are widely used in biology and chemistry labs, owing to their properties, like transparency, heat resistance, and inertness.
Showing all 9 results
-
Anemometer Cup Type
Read moreThe Cup Counter Anemometer has a cup wheel consisting of three conical cups in a horizontal plane.
The cup wheel spindle is of stainless steel and connected worm gearing to a revolution counter mounted in a water proof housing. By observing the counter reading at the beginning and end of any period of interest the average wind speed during the interval can be calculated.
The Cup Counter Anemometer observing window is sloped to permit easy reading when mounted on the mast. more.
-
Automatic Knife Sharpner
Read morePhysilab (spencer type) automatic knife sharpner is poratble precise and efficient automatic sharpening equipment with 60 mintue electric timer to control sharpening period. Equipped with universal knife holder to accept all microtome knives unto 180mm in length. The complete internal mechanism is enclosed in a metal hosing with hinged m. S. Duly epoxy powder coating paint and perplex cover to ensure dust free and precise sharpening operation.
-
-
-
Dry Bath Incubator
Read moreMains Input 230v, 50Hz : 100v, 60Hz AC Supply W x D x H 168 (W) x 232 (D) x 88 (H) Body Metal Body Weight 2.3 Kg. Net Trmp. Controller Digital Type Temp. Range 37ºC To 70ºC Accuracy 0.5ºC @ 37ºC, ± 3% Except 37ºC Heating Block 24 Holes of 12.7 mm Diameter Timer 1 To 999 (Digital Type) -
-
Junkers Gas Calorimeter
Read moreJunker’s Gas Calorimeter used in Petroleum Industries/Laboratory & R&D Centers, Coke Oven Batteries, Thermal Power House Cement Industries, Gas Companies, Steel Plants and Fertilizer Industries.
Junker’s principal of Burning of known Volume of Gas under maximum efficient method of heat transferring conditions and imparting the heat to a stealing flowing water and finding out the amount of heat transferred. This is known as the calorific value of the gas. The equipment consists of calorimeter with burner on a tripod stand, Gas Flow meter (non-recording type) pressure Governor and DIGITAL TEMPERATURE INDICATOR. -
Needle Destroyer
Read moreThis is an electrical equipment to destroy used needles by burning and destroy syringe by cutting.
We can protect nursing staff and society from transmission of diseases due to needle stick injuries.Model: HL 1212 Model: HL 1515 Mains Input: 230v, 50Hz / 110v, 60Hz , AC Mains Input:230v, 50Hz | 110v, 60Hz , AC Body : Metal Body Body :ABS Plastic + Metal Gauge Of Needles: Can Burn 30 to 20 Gauge Gauge Of Needles: Can Burn 30 to 20 Gauge Destruction Time: 1.5 to 3 Seconds Destruction Time: 1.5 to 3 Seconds Burning Temperature: 1400° C to 1800° C Burning Temperature: 1400° C to 1800° C Weight : 2.1 Kg. Net Weight :1.9 Kg. Net Overall Size: 155 (L) x 129 (W) x 86 (H) mm Overall Size: 160 (L) x 133 (W) x 92 (H) mm Model: HL 1616 Mains Input: 230v, 50Hz Body : Metal Body Gauge Of Needles: Can Burn 30 to 20 Gauge Destruction Time: 1.5 to 3 Seconds Burning Temperature: 1400° C to 1800° C Weight: 1.9 Kg. Net Overall Size: 155 x 128 x 86 mm -
Test Tubes Stand
Read moreThis autoclavable stand is perhaps the most commonly used test tube stand in various laboratories. For better visibility, this 6 place rack is end supported by 2 columns. The top plate has 2 holes for holding 25 mm dia test tubes, four holes to hold 16 mm dia tubes where as the base has corresponding hemispherical wells. It also has six vertical pins for drying tubes. Another option available in this section is a test tube stand in which all the holes in the top plates can hold 25 mm dia tubes.