Excellent quality of Laboratory instruments is supplied by Laboratory instruments manufacturer in India. Our aim to set up the hospital with our high-grade range of Laboratory instruments which is manufactured according to the needs of medical professionals. Our range includes ABBE Refractometer, BOD Incubators, Deep freezers, Bomb Calorimeter, and many more.
Designed for accurate and quick examination of the
(a) Refractive index
(b) Mean dispersion of liquids, solids and powder.
ND Range: ND 1.300 to ND 1.700 in step of 0.001
Accuracy: 0.0002.
Sugar(Percentage): 0 to 95% in steps of 1 division.
Accuracy: 0.5%
Temperature: 0-1000C
The body of ABBE Refractometer instrument is fixed having a leaning of 600, correct refractive index and sugar percentage can be read directly in the field.ABBE Refractometer consist of a abbe double prism compensaor, telescope mirror limb, graduated sector, reading magnifier and a radial arm which carries a vernier.Abbe’s double prisms leaves a narrow space(about 0.1mm.) between the adjoining faces of prism and compensator consists of the amici prisms which serves for rendering the line of achromatic separation.A thermometer is fitted on the double prism.
Transparent Anaerobic Culture Jar of 3.5 lit. Capacity which is made of Polycarbonate. The lid of the jar is made of Alluminium Pressure die casting fitted with Pressure valve, Vacuum valve, Safety valve & Compound Pressure cum vacuum gauge, three finger aluminum clamp and sealing “O” ring and Air/Gas chuck
This is recommended only where inside condition of air of jar is removed thru vacuum pump and CO2 is filled in the jar thru CO2 gas cylinder to generate anaerobic conducting in the jar.
Also Supplied with Plain aluminum Pressure die casted lid which can be fitted when readymade gas packs are used to generate the anaerobic conditions inside the jar.
Supply as above and completed with following accessories
B. O. D. Incubator (bio-chemical oxygen demand)
Designed for low temperature incubation and routine determination of bio-chemical oxygen demand (B. O. D.). This unit is composed for doubled walled chamber with a thick layer of fine glass wool to prevent loss of heat and cool. For work in lower temperature a cooling unit is provided at the lower portion of the working chamber and heating arrangement has been made in the inner chamber for work of higher temperature. The temperature varies from 5º c to 60º c adjustable at any desired point by dual display microprocessor PID digital temperature indicator cum controller with a accuracy of ± 0. 5º c. Air circulating fan has been provided to keep the temperature uniform inside the chamber. Inner chamber is made up of richly anodized aluminum or highly polished stainless steel sheet. Supplied with two/three removable perforated shelves. Exterior made out of thick mild steel sheet duly finished in powder coating. Outer double wall door is provided with magnetic gasket and lock & key arrangement. Inner door made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. Refrigeration unit is formed by ISO/ ISI marked compressor. Control panel is provided with toggle switch, temperature controller, various indicators etc. Complete with automatic internal light, l- shaped thermometer, connecting cord and plug to work on 220v ac 50 hz single phase.
It is used for determination of heat of combustion, calorific value and sulphur contents of solid and liquid fuels. The Bomb body and lid are machined from corrosion resisting stainless steel rod. It’s capacity is approx. 300ml. It is provided with high pressure valve and electrodes. The calorimeter vassel and electrodes. The calorimeter vassel /stirrer FHP motor are provided and water jacket as per IP. The Bomb calorimeter is supplied with firing unit, Digital /Glass Beckman Thermometer, Pallet press, ignition Nichrome wire and pressure gauge with copper pipe fitting .
Bomb Calorimeter App. with digital thermometer 0.1°c read
Bomb calorimeter apparatus with digital thermometer 0.01°c readout
Bomb calorimeter apparatus with digital thermometer 0.01°c readout and PUFF insulated body.
Bomb calorimeter app. With digital thermometer 0.01°c readout with remote control.
Bomb calorimeter app. Digital Thermometer0.01°c readout with PUFF insulated body with remote.
1. To determine of chemical oxygen demand.
2. Solid state block heated unit with provision for samples to be digested at a time.
3. 38mm dia reaction vessels with 20ml sample size o heat at temp. Of 150 c +- 1 C.
4. Temperature is controlled by digital temp. Indicator cum controller.
5. It has provision for 15 samples.
6. Supplied with 15 nos. Glass reaction vessels.
7. Fitted with a on/off switch.
8. To work on 220/230 volts a. C.
These Deep Freezer are generally used in Microbiology, Virology, Pathology, Food Research Laboratory, Biotechnology etc. It has been designed to maintain constant temperature at set temperature.
Construction: This Laboratory Deep Freezer is double walled cabinet with 100mm puff insulation. outer wall is made of mild steel sheet and inside chamber made of Stainless Steel 304 Qlty. Full view acrylic glass door is also provided. Cabinet is mounted on castrors for easy movement from one place to another.
Features:- 1. Double walled units have thick PUF Insulation between inner and outer wall.
2. Outer wall scratch free moulded or of mild steel sheet duly power coated.
3. Temperature range from ambient to(-)20°C or (-)40°C is achieved by hermetically sealed compressor.
4. The copper cooling coils are welded throughout on the outer side of the S.S. Chamber with provided efficient cooling.
5. Body is mounted on a sturdy angle iron frame and is mounted on castor wheels.
6. Unit is fitted with Microprocessor Based Digital Temperature Indicator-cum-Controller.
7. CFC free ECO friendly compressor.
8. To work on 220/230Volts A.C. supply
Capacity Ltrs.
4cu.ft 112
6cu.ft 171
10cu.ft 280
For injecting formaldehyde solution in cadaverous at much higher speed than normal gravity process. The body of the Embalming Machine(Cadaverous Injector) machine is made of Stainless Steel/ Mild Steel (As required). Unit is fully covered & mounted on a portable trolley having four castor wheels for easy movement. Unit consists of one air compressor which is connected with a stainless steel tank of 10 liters capacity meant for storing and injecting the solution. Incorported with latest Reciprocatory pressuring unit for efficient performance. The machine is Completely Noiseless and Vibration free which justifies the Superiority of our machine from the other brands available.Tank is fitted with a safety valve, pressure gauge and rubber tubing having provision for injection.
Supplied complete with electric cord, plug and suitable to work on 220 volts, 1ph 50 hz, ac supply.
FLOCULATOR ( SIX JAR TEST APPARATUS)has been specially designed for use in water treatment plants to correctly estimate the dosing of alum and such other coagulants for treatment of water.
FLOCULATOR ( SIX JAR TEST APPARATUS)consist of electronically controlled variable speed electronic motor with timing belt driven mechanism. Speed controller is provided to control the speed of four/six stirrers from 5 to 150 RPM. Stainless Steel/ Brass paddles are provided.
Fume Hood (304 Stainless Steel)
Fume Exhaust Hoods Are Designed To Contain And Exhaust Toxic, Obnoxious Or Otherwise Harmful Gases, Vapors, Mist Etc. To Protect Personnel And Equipment. A Motor Driven Blower Creates Negative Pressure Within The Chamber, Extracting The Contamination Air From Work Area And Expels It Into The Atmosphere. The Hood Is Ventilated Of The Air Drawn From Inside The Laboratory Which Is Used Effectively For Thorough Sweep-out Of Work Chamber.
The Standard Features Of Fume Hoods Are-
Inbuilt Centrifugal Blower Unit
Fluorescent Tubes With Safety Electrical
Internally Located Electric Plugs
Gas, Vacuum & Air Connections
Counter Balanced Sliding Up & Down Front Sash (door)
We bring forth a wide variety of Heating Mantles which are extensively used in laboratories to apply heat to containers. Our Laboratory Heating Mantle is available with a sturdy aluminum body. Its epoxy powder finish makes it a distinguished product. The Heating mantle which we offer is best suited for round bottom flask. Proper electric wiring makes certain that no short circuit takes place. The high temperature range of 400 degrees Celsius makes our Heating Mantles ideal for industrial use.
Hot Air Oven Universal Memmert Type (Elements on Three Sides)
Hot Air Oven temperature range from few degree above ambient to 250oC is controlled by a precision thermostat with sensitivity of plus minus ±2%oC. Hot air oven heating elements are placed in ribs at the bottom and sides. In the chamber 2 removable shelves are provided. Adjustable air ventilators are placed near the top of the side’s. Built in L shape thermometer.
PHYSILAB Hot Plate Rectangular
Laboratory hot plates are available in round and rectangular shapes.Body of hot Plates is fabricated out of thick mild steel duly finished with powder coating.heater made of kanthal wire to operate on 220V AC 50Hz single phase.Heat is controlled by three point ritary switch with an indicator lamp fo mains etc.
Double walled, inner made of Stainless Steel, outer made of thick best quality Mild Steel, the surface of which is powder coated. Insulation between inner and outer wall is done with glass wool to prevent any heal loss. Inner chamber is provided with 3 nos. perforated Stainless Steel shelves with ribs to adjust the shelves at desirable height.Provided with double door, inner made of thick transparent full view glass and outer door is double walled metallic properly insulated with glass wool and also provided with best quality handle, gasket etc.
Moulds (brass)L-shape type embedding paired mould are used for making parafin blocks. Microtomes parafin blocks can be made of different sizes by adjusting l-mould. size :
(a) 37mm x 25mm x 15mm
(b) 50mm x 25mm x 15mm
(c) 75mm x 30mm x 19mm
All variants are available with U.V. Tube, Fluorescent Tube light, Gas cock & Static Pressure Manometer or Differential Pressure Magnehelic Manometer. Features:- Efficiency: 99.97% (or above) down to 0.3 micron Blower Unit: Centri-balanced, centrifugal motorized blower with ISI marked motor. 1/3 H.P. 1440RPM Discharge: Air volume 90cfm±10% Noise Level: below 65 dB Illumination by Fluorescent Tube: Light Intensity-The intensity of the light at the work Surface is in between 800 to 1000lux. Germicidal: By Ultra-Violet Tube (Approx 50 micro watts per sq.cm on the entire work surface.) Electrical: All electrical fittings are as per ISI standards. All internal wirings are protected with heat resistant material. Manometer: Available are two types:
Dial type Magahelic Differential Pressure Manometer.
Block Type acrylic/Plexi-glass inclined Static Pressure Manometer.
