Showing 16–30 of 73 results
-
Dip Circle (Dip Needles)
Read moreThe case is made of aluminium, strongly magnetised cobalt steel needle fitted with imported hard axle rolls on knife edges agates and can be clamped when desired by a V clamp, a sensitive spirit level is provided. The tripod stand is provided with three levelling screws.
College type:- Dip circle available in brass and aluminium.
-
Doctor Model Centrifuge Machine
Read moreA low Priced units meeting the small capacity centrifuging requirements of medical practitioners, pathological laboratories requirements of medical parctitioners, pathological laboratories and hospital for routine centrifuging tests. The unit are fitted with resiliently mounted motor for vibration free performance having built is 5 step speed regulator and non-removable swing-out rotor complete with tube carriers.
Cap. :-
- 15 x 4 tubes 3500-4000 RPM
- 15 x 6 tubes 3500-4000 RPM
- 15 x 8 tubes 3500-4000 RPM
-
-
Dry Bath Incubator
Read moreMains Input 230v, 50Hz : 100v, 60Hz AC Supply W x D x H 168 (W) x 232 (D) x 88 (H) Body Metal Body Weight 2.3 Kg. Net Trmp. Controller Digital Type Temp. Range 37ºC To 70ºC Accuracy 0.5ºC @ 37ºC, ± 3% Except 37ºC Heating Block 24 Holes of 12.7 mm Diameter Timer 1 To 999 (Digital Type) -
-
Electrophoresis Apparatus
Read moreElectrophoresis Horizontal-Mini GEL
Product Details:
Minimum Order Quantity 1 Unit Shape Rectangular Operation Mode Manual Brand Physilab Specifications:
It is required in biotechnology, Molecular Biology applications in colleges, Universities, Research Institutes.- It is meant for Nucleic Acid (DNA-RNA) characterization.
- These are also called Submarine Electro-phoresis Unit/Agrose Gel/Poly
- Acrylamide Gel Electrophoresis (Mini size)
- The unit is joint less, mounded of transparent Polycarbonate to avoid leakage.
- It is fitted with 2 Platinum Electrodes and supplied with transparent jointless safety lid which is also made of polycarbonate.
- It is completed with Buffer chamber, safety lid with cables
Accessories:
Comb 9 Wells – 10 Teeth’s (Set of 2 Pcs.)
Comb 11 Wells – 12 Teeth’s (Set of 2 Pcs.)
Comb 13 wells – 14 teeth’s (Set of 2 Pcs.)
Casting Tray, Size 10x7cm (Set of 1 Pcs.)
Casting Tray, Size 7x7cm (Set of 1 Pcs.)
Red and Black Cable (1 Each) -
Embalming Machine
Read moreFor injecting formaldehyde solution in cadaverous at much higher speed than normal gravity process. The body of the Embalming Machine(Cadaverous Injector) machine is made of Stainless Steel/ Mild Steel (As required). Unit is fully covered & mounted on a portable trolley having four castor wheels for easy movement. Unit consists of one air compressor which is connected with a stainless steel tank of 10 liters capacity meant for storing and injecting the solution. Incorported with latest Reciprocatory pressuring unit for efficient performance. The machine is Completely Noiseless and Vibration free which justifies the Superiority of our machine from the other brands available.Tank is fitted with a safety valve, pressure gauge and rubber tubing having provision for injection.
Supplied complete with electric cord, plug and suitable to work on 220 volts, 1ph 50 hz, ac supply.
-
Fluculator Jar Test Apparatus
Read moreFLOCULATOR ( SIX JAR TEST APPARATUS)has been specially designed for use in water treatment plants to correctly estimate the dosing of alum and such other coagulants for treatment of water.
FLOCULATOR ( SIX JAR TEST APPARATUS)consist of electronically controlled variable speed electronic motor with timing belt driven mechanism. Speed controller is provided to control the speed of four/six stirrers from 5 to 150 RPM. Stainless Steel/ Brass paddles are provided.
-
-
Fume Hood
Read moreFume Hood (304 Stainless Steel)
Fume Exhaust Hoods Are Designed To Contain And Exhaust Toxic, Obnoxious Or Otherwise Harmful Gases, Vapors, Mist Etc. To Protect Personnel And Equipment. A Motor Driven Blower Creates Negative Pressure Within The Chamber, Extracting The Contamination Air From Work Area And Expels It Into The Atmosphere. The Hood Is Ventilated Of The Air Drawn From Inside The Laboratory Which Is Used Effectively For Thorough Sweep-out Of Work Chamber.The Standard Features Of Fume Hoods Are-
- Inbuilt Centrifugal Blower Unit
- Fluorescent Tubes With Safety Electrical
- Internally Located Electric Plugs
- Gas, Vacuum & Air Connections
- Counter Balanced Sliding Up & Down Front Sash (door)
-
-
Head Lights LED
Read moreSurgical Microscope Direct Halogen is also same as Surgical Microscope Cold Light but with the difference that the additional illuminating beam Halogen Lamp and a measurement beam which makes the patients surgery very clear.
Specifications :-
Microscope Section Binocular Tube : 90° ENT & General Surgery
Eyepieces : 12.5x/ 10x/ 16mm Dioptric Adjustment
Magnification Changes : Built in Manual 3-Step Changer
Total Magnification : 7.5x, 12.5x, 20x
Field of View : 59mm, 37.8mm, 23.5mm, 14.5mm, 9.5mm
Objective Lens : F = 200, 250, 300, 400mm (For General Micro-Surgical Fields)
Working Distance : 200mm
Interpupillary Distance Adjustment : 55mm to 75mm
Illumination Section
Type : Direct Halogen
Light Source : 24V/250Watts Halogen lamp
Illumination Control : Continuous Adjustment
Field of illumination : 70mm
Filter : Cobalt Blue, Red Free, Heat AbsorbingStand Section
- Type : Table Clamp
- Vertical Movement Of Counterbalanced Arm : 400 mm
- General Information
- Weight : 50Kg.
- Height : 1550mm
- Electrical Power : AC 220V, 240V, 50/60 Hz
- Power Consumption : 220 VA/110V
Optional Accessories
Beam Splitter With CCD Camera Attachment
CCD CameraOptional Accessories:-
Optional accessories are listed as separate items in “Accessories” section under products, there brought separately. -
Heating Mante
Read moreWe bring forth a wide variety of Heating Mantles which are extensively used in laboratories to apply heat to containers. Our Laboratory Heating Mantle is available with a sturdy aluminum body. Its epoxy powder finish makes it a distinguished product. The Heating mantle which we offer is best suited for round bottom flask. Proper electric wiring makes certain that no short circuit takes place. The high temperature range of 400 degrees Celsius makes our Heating Mantles ideal for industrial use.
-
-
Hot Air Oven
Read moreHot Air Oven Universal Memmert Type (Elements on Three Sides)
Hot Air Oven temperature range from few degree above ambient to 250oC is controlled by a precision thermostat with sensitivity of plus minus ±2%oC. Hot air oven heating elements are placed in ribs at the bottom and sides. In the chamber 2 removable shelves are provided. Adjustable air ventilators are placed near the top of the side’s. Built in L shape thermometer.
Optional:-
- Air Circulating Fan.
- Digital Temperature Indicator cum controller.
- PID Digital Temperature Controller.
- Imported Timer.