PHYSILAB Hot Plate Rectangular
Laboratory hot plates are available in round and rectangular shapes.Body of hot Plates is fabricated out of thick mild steel duly finished with powder coating.heater made of kanthal wire to operate on 220V AC 50Hz single phase.Heat is controlled by three point ritary switch with an indicator lamp fo mains etc.
Double walled, inner made of Stainless Steel, outer made of thick best quality Mild Steel, the surface of which is powder coated. Insulation between inner and outer wall is done with glass wool to prevent any heal loss. Inner chamber is provided with 3 nos. perforated Stainless Steel shelves with ribs to adjust the shelves at desirable height.Provided with double door, inner made of thick transparent full view glass and outer door is double walled metallic properly insulated with glass wool and also provided with best quality handle, gasket etc.
This INSECT HANDLING DEVICE WITH VACUUM CLEANER device can be used for fast collecting of large number of any type of insect in the insectaries. Further, the insects are not injured during the collection and the workers are not exposed to health hazards of scales sheded by the insect.
Keep the lid of collecting container on the top and ensure the pipe enters the hole provided in the centre of the lid.
Fix the collecting container inverted on the lid. Cover the collecting container with the outer container.
Switch on the vacuum cleaner and feel the suction pressure at the collecting tube.
Collect the insects by collecting tube along with sucking air.
Adjust suction pressure by regulato provided at the top of the outer container.
For pinning of insects both inside top & bottom, White hardwood / Teakwood frame with melamine lamination on top & MDF sheet bottom is nicely polished. Top & bottom lined with 8mm thick soft pinning. washable EVA sheet. Inside glazed white. Raised wall with holes for insecticide inside bottom to make box air tight and pest proof. Fitted with brass hinges. index card holder & clips.
Junker’s Gas Calorimeter used in Petroleum Industries/Laboratory & R&D Centers, Coke Oven Batteries, Thermal Power House Cement Industries, Gas Companies, Steel Plants and Fertilizer Industries.
Junker’s principal of Burning of known Volume of Gas under maximum efficient method of heat transferring conditions and imparting the heat to a stealing flowing water and finding out the amount of heat transferred. This is known as the calorific value of the gas. The equipment consists of calorimeter with burner on a tripod stand, Gas Flow meter (non-recording type) pressure Governor and DIGITAL TEMPERATURE INDICATOR.
Moulds (brass)L-shape type embedding paired mould are used for making parafin blocks. Microtomes parafin blocks can be made of different sizes by adjusting l-mould. size :
(a) 37mm x 25mm x 15mm
(b) 50mm x 25mm x 15mm
(c) 75mm x 30mm x 19mm
All variants are available with U.V. Tube, Fluorescent Tube light, Gas cock & Static Pressure Manometer or Differential Pressure Magnehelic Manometer. Features:- Efficiency: 99.97% (or above) down to 0.3 micron Blower Unit: Centri-balanced, centrifugal motorized blower with ISI marked motor. 1/3 H.P. 1440RPM Discharge: Air volume 90cfm±10% Noise Level: below 65 dB Illumination by Fluorescent Tube: Light Intensity-The intensity of the light at the work Surface is in between 800 to 1000lux. Germicidal: By Ultra-Violet Tube (Approx 50 micro watts per sq.cm on the entire work surface.) Electrical: All electrical fittings are as per ISI standards. All internal wirings are protected with heat resistant material. Manometer: Available are two types:
Dial type Magahelic Differential Pressure Manometer.
Block Type acrylic/Plexi-glass inclined Static Pressure Manometer.
Magnascope Bench Magnifier is especially designed for study of Zoological specimens, Botanical specimens and assembly and inspection in industrial purpose. The magnifier is fitted with optical glass lens dia M. 155 mm and Magnification 3 x mounted on stout stand, adjustable vertically and horizontally, allows the lens to swivel in all directions. The cast iron base of 200 x 200 x 75 mm provide extra stability to the stand during use. The circular fluorescent lamp for giving cool shadow free and uniform illumination. Operated on 220V.
Our Magnetic Stirrer is compact stirring device utilizing a rotating magnetic field (created by a permanent magnet) which induces variable speed stirring action. Stirring is accomplished by means of small teflon rotor, which when placed in the liquid to be stirred is capable of rotation by magnetic field applied from below the container. The unit is fiited with pilot lamp. To work on 220/230 volts A.C.
We are amongst the reputed manufacturers of HL-517 michelson interferometer. These interferometers have lead screw of dia 17 mm, Pitch 1 mm with a threaded length of 200 mm. The lead screw and its nut are optically lapped for maintaining constancy of the pitch. Further, the mirror mounts are of kinematic type that has orthogonal tilt arrangement in x & y plane by using fine threaded screws.
Optical Parts:
Beam Splitter: (Size: 40 mm x 30 mm x 8 mm), partially coated
Used for storing cadaverous under low temperature cool conditions in order to prevent decomposition. These units are double walled with outer made of Stainless steel and inner walls is also stainless steel. Tray is made of Stainless Steel sheet to carry dead bodies. Trays travel on rollers fitted with ball bearings for easy movement. Hermetically sealed compressor serves Refrigeration unit, to maintain temperature range of 2°c to 5°c (as ordered). Unit is fitted with digital temperature indicator cum controller. To work on 220/230V AC. Supply.
Capacity Voltage stablizer
Single Body 3KVA
Two Bodies 4KVA
Three Bodies 5KVA
Four Bodies 8KVA
Six Bodies 8KVA
Muffle furnace (Laboratory Model) is Light weight with ceramic fibre wool installation in place of refractory bricks. Working temperature 900°C. Maximum temp. 1000°C fitted with by Dual Display Microprocessor PID Digital Temperature Indicator cum Controller, CI/AL thermocouple. Heating elements are made up of Kanthal wire. Workable on 220V AC 50Hz single phase.
This is an electrical equipment to destroy used needles by burning and destroy syringe by cutting.
We can protect nursing staff and society from transmission of diseases due to needle stick injuries.
A Perspex organ bath with fine thermostatic temperature control, complete with accessories, bath size 8″x4″x5″ with leak proof dovetailed joints, fitted an sturdy metal frame.
